preloader
location
San Jose, CA 95129
working hours
24/7 Hours
+1 669 264 1656
  • Home
  • >
  • Reports
  •  Filtered By Chemical & Material Category

Acid Proof Lining, By Product (Tile Lining, Thermoplastic Lining, Ceramic and Carbon Brick Lining ), By End-User (Oil and Gas, Marine, Construction, Chemicals, Transportation, Mining and Metallurgy, Automotive, Power Generation), By Form (Water-Borne, Powder-Based, Solvent-Borne) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

The industrial surfaces experience mechanical, chemical and thermal load which deteriorating the building surface and walls. These needs are protected by using effective solutions against corrosion where chemicals are produced, processed, stored and supplied. Therefore, the acid proof lining is the best solution for such situations. Because it improves the visual appeal and durability of the structure and provides abrasion resistance. The acid proof lining is the type of coating that protects pl...

MDCHZCFEH3RA

  Feb 17, 2020

Chemical & Material

Read More

Renewable Methanol, By Primary (Municipal Waste, Industrial Waste, Biomass), By Application (MTBE, Solvents, Dimethyl Ether, Gasoline, Formaldehyde), By End-User (Power Generation, Transportation, Chemicals, Construction) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

Renewable methanol is a type of biofuel derived from renewable energy and non-food crop sources. The methanol is used across a wide range of applications including power generation, chemical manufacturing, and transportation. Globally thousands of tons of renewable methanol are consumed by the above sectors every year. The increasing greenhouse emission due to the consumption of conventional energy sources and increasing prices of crude oil propelled the end-user industry to use methanol as an e...

MDCHACC04KWD

  Feb 17, 2020

Chemical & Material

Read More

Phosphate Conversion Coatings, By Product (Iron Phosphate, Zinc Phosphate, Manganese Phosphate), By Substrate (Steel, Cast Iron), By End-User (Consumer Appliances, Food & Beverages, Automotive) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

A phosphate conversion coating is used to treat steel, zinc, and aluminum. Phosphate is one of the important elements used in finishing operations and provides various functions including promoting adhesion, absorbing lubricants, increasing corrosion resistance, and enhancing appearance. The phosphate conversion coating is majorly used in automotive as well as the construction industry to secure the metal used in the final product from the damage. The phosphate conversion coatings are environme...

MDCHA2WKBS1B

  Feb 13, 2020

Chemical & Material

Read More

Aroma Ingredients, By Type (Synthetic Ingredients, Natural Ingredients), By Application (Fine Fragrances, Toiletries, Cosmetics ) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

Aroma ingredient is a chemical combination of complex natural and synthetic ingredients that are added to final products to include the desired odor. The aroma ingredients are widely used in various types of personal care as well as consumer care products. The global aroma ingredients market has experienced steady growth due to the increasing demand for personal care products. Increasing awareness among consumers about organic aroma ingredients and regulatory organizations' compliance with the i...

MDCH2RZF1AW0

  Feb 13, 2020

Chemical & Material

Read More

3D Printing Metals, By Type (Titanium, Nickel, Steel, Aluminum), By Form (Powder, Filament), By End-use (Automotive, Aerospace & Defense, Healthcare) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

3D printing metal is a metal additive manufacturing technology used to produce the complex structure and smaller designs. The 3D printing metals enabled manufactures to develop a complex structure with an easy method which was not possible by using traditional methods of manufacturing. 3D printing metals help manufacturers to manufacture a product layer by layer, therefore it provides high accuracy in the production process and improves the product quality. In this technique manufactures use the...

MDCH02NJENAJ

  Feb 10, 2020

Chemical & Material

Read More

Antimicrobial Additives, By Product (Organic Antimicrobial Additives, Inorganic Antimicrobial Additives), By Application (Plastics, Textiles, Paints and Coatings, Pulp and Paper), By End-User (Healthcare, Packaging, Food and Beverages, Construction, Automotive) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

The antimicrobial additives protect the plastic from bacteria, fungi, mold, and algae microorganisms. Therefore, the antimicrobial additives are majorly used in plastics. The antimicrobial additives melted and blended in the polymer to produce the microorganism resistible plastics. Globally the demand for antimicrobial additives is growing rapidly in the chemical and material industry. in the last few years, many research studies have been conducted to identify the features of the antimicrobial ...

MDCHEMP2VXVH

  Feb 10, 2020

Chemical & Material

Read More

Marine Lubricants, By Oil (Mineral Oil, Synthetic Oil, Bio-based, Grease), By Application (Engine Oil, Hydraulic Fluid, Compressor Oil), By Ship (Bulk Carrier, Tanker, Container) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

The marine lubricant market has huge opportunities in the market due to structural changes in the international market as well as increasing demand for maritime transport as a cost-effective option. The increasing demand for marine time transportation will have a huge impact on the shipping industry which will increase the demand for marine lubricants. However, the increasing oil spill disasters forced regulatory bodies to introduce new policies to use non-toxic, bio-based, and biodegradable lub...

MDCHSUSHL2Y1

  Feb 06, 2020

Chemical & Material

Read More

Kaolin, By Grade (Calcined, Hydrous, Surface modified), By Application (Paper, Paints & coatings, Plastics, Ceramics, Rubber) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

Kaolin is a type of clay material found in nature and it can be produced in the laboratory. The Kaolin can be used in many industries including paper, rubber, ceramic, and fiberglass. The kaolin has multiple benefits including aesthetics and structural benefits which improve the final product quality. The kaolin market is driven by the rapid growth in diversified application including the telecommunication, paper industry, and ceramic industry. The growing construction industry will have a posit...

MDCH4RNBE4OL

  Feb 06, 2020

Chemical & Material

Read More

3D Printing Plastics, By Type (Polymers, Metal, Ceramics), By Form (Powder, Filament, Liquid), By End-us (Industrial, Consumer products, Aerospace & Defense, Automotive, Healthcare, Education & Research) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

The global 3D printing plastic market is experiencing a significant growth rate due to the increasing demand for customized products and favorable government investment. Moreover, increasing demand from a wide range of applications like automotive, aerospace and defense industry fuel the growth of the market. Recent innovation and development in the additive manufacturing industry have created new opportunities for the automotive sector. This approach is facilitated to bring lighter, stronger, a...

MDCH8GDPCLZ2

  Feb 05, 2020

Chemical & Material

Read More

Adhesives Films, By Product (Pressure Sensitive, Hot-melt, Light-cured), By Application (Aerospace , Electrical & Electronics , Automotive & Transportation , Consumer ) and By Region - Global Industry Perspective Comprehensive Analysis and Forecast, 2020-2026

Adhesive films are majorly used as a solid material which is environment-friendly. The adhesive films are available in a thickness of 2 to 8 mils. The adhesives films' performance and processing properties are reproducible from one production process to another place. The hot cured adhesives films are stronger adhesive compared to the cold-cured adhesive polymer. The adhesive will have a huge demand for moisture and chemical resistance. The adhesives films are compatible with the polymer matrix ...

MDCHHKRSEP54

  Feb 04, 2020

Chemical & Material

Read More